Easily Achieve new regs

KEEP 100mm overall cavities and achieve 0.18 EASILY

  • The ONLY approved way to build a 25mm cavity
  • Achieving the new regs with a dry, clear, vented airgap
  • BBA approved for use in all exposure zones

Easily achieve 0.18, Keep 100mm cavities

Achieving the new 0.18W/m2K part L regulations has never been easier! By simply switching to SureCav25 you can keep 100mm overall cavities, 300mm walls, whilst achieving 0.18.

Easily achieving the new regs, without compromising on quality. SureCav ensures a clear, dry, vented air gap is maintained, whilst allowing room for insulation and contributing to an overall 100mm cavity, achieving 0.18 easily.

The SureCav25 system allows you more room to add extra insulation without increasing the build’s footprint. This means you can lower the U-Values without building wider walls or the added hassle/expense of re-designing or re-doing any drawings.

SureCav25 you maximise your internal floor space and remain compliant!

Chart showing insulation options for SureCav25

STOP re-drawing to 150mm wide cavities!

Contrary to misleading guidance, you do not need 150-200mm cavities to achieve the new regs. This is simply not the case.

Switching to wider cavities, doesn’t just effect this one section, it creates a whole lot of headaches and effects the whole build! This switch means a loss of internal living space, wider walls, re-designing of plans and increases project cost, i.e wider, more costly lintels. This does not need to be the case!

Sticking to what we know, the 100mm cavity but utilising the benefits of SureCav25 to achieve 0.18 in a standard 100mm cavity. Building smarter, not harder eliminates these headaches and ensures your project continues, in budget, on time and without delay.

Meaning you take back control and say no to wasting your internal floor space. Staying compliant, achieve the new regs easily with SureCav25 !

To find out more about this and all of the other benefits of SureCav, contact our team today!

Brick traditional Masonry construction, against the SureCav BBA approved, cavity spacer, rainscreen system used with a partial fill insulation cavity.

Testimonials

See how one contractor found using SureCav to protect from wind driven rain
Builder laying bricks
One of the best products in the construction industry!
Dan, Greenhill Construction SW Ltd
Block wall under construction with SureCav in cavity
We have supplied the SureCav system for several years to bricklayers across the Southwest. Not only do we find the team at SureCav highly knowledgeable and helpful, but the SureCav system gets great reviews from all our customers who install it. Customers who use SureCav will continue to use it on future projects as it is a quick, easy and professional system to instal. The service is second to none and I really can’t find a fault. Suitable for both timber frame and masonry, it really is a fantastic system.
Eric Sutherland, Branch manager
Masonry construction complete using SureCav25, against the SureCav BBA approved, cavity spacer, rainscreen system used with a partial fill insulation cavity.
I am so impressed with this product I would be happy for you to bring any of your prospective customers to my site at Wool, Dorset, and I will be pleased to show them your system.
Chris Allworthy, Barratt Homes Site Agent
laying stonework easily against the SureCav system, SureCav 25. The Keeping a clear, dry, vented cavity free from any moisture. Eliminating water ingress issues and damp in homes . Used with stone and Brick masonry finish with SureCav25 bba approved cavity spacer rainscreen system keeping clear, dry, vented moisture and mortar-free cavities guarenteed whilst protecting against wind-driven rain and avoiding water ingress issues easily
Having used SureCav on at least 6 contracts we will never use backing blocks or shutter boards again.
Richard, EMM-LEC Ltd
Brick traditional Masonry construction, against the SureCav BBA approved, cavity spacer, rainscreen system used with a partial fill insulation cavity.
SureCav is a fantastic product and would use it on all jobs.
Ross Parkyn, Director, Duchy Brickworks
standing infront of SureCav, 100% recycled cavity spacer rainscreen system, behind is insulation and traditional build in a partial fill cavity. The SureCav25 and 50 are both BBA approved for use in any exposure zone, offering protection against wind-driven rain and moisture issues.
We have used SureCav on a new stone house which was shortlisted for an RIBA Award. SureCav is a very good way, without the need for all of the additional foundations, and loss of floor space in the building associated with a blockwork backing to the external masonry. This saves time, space and money plus it gives the additional layer of weather protection provided by the SureCav sheets. We are currently using SureCav. We are very pleased with the high quality stonework. SureCav makes it easier to achieve the effect we want.
Phil Easton, Founding Director at Western Design Architects
Clear, dry, vented cavity creating using the SureCav 100% recycled plastic cavity spacer system
SureCav is a fantastic product and as we said in the CPD it has very much become a standard detail for stonework within the office. Perhaps now with knowledge of the further advantages of waterproofing and stability it may become more widely specified for other cavity wall types also. Many thanks for all your help and we hope that our support of your product will continue to push SureCav as a recognised standard for cavity wall construction within the industry.
Louisa Meek, CSA architects
House under construction with scaffolding around it
I really can’t recommend the SureCav product enough! Our self build project has been stressful to say the least with the rising costs of labour and materials, we’ve had to do whatever we can to save where we can. I thought a good way to do this would be installing the SureCav myself, however with never using the product before I was unsure of how straight forward this would be. I am happy to say it was an absolute breeze! The stonefacing looks great against it and the stone lads said it gave them a great flat structure to work against. This really is a 10/10 A*** product that we couldn’t be happier with and recommend enough.
Andy Holcroft, self-builder in Cumbria
Large house with red roof tiles
We have just built a new build using SureCav25 and found it superb to use, allowing us to increase insulation thicknesses within the build, enabling us to achieved a great EPC (energy performance) result. We also found it very easy to use as it guaranteed a clear cavity throughout the build and it also saved us using a backing block for the stone façade, actually increasing the internal rooms sizes by at least 200mm. Overall, we found the SureCav a fantastic system – thanks SureCav!
Tony Iles, Director, Tonic Construction Limited
Stone built home, under construction using the SureCav cavity spacer, rainscreen BBA approved system
The speed of build, easy storage and handling make SureCav an ideal system. We have found this especially to be the case where storage and working space on site is at a premium.
Ray Holmes, Hopkins Developments
Masonry construction, against the SureCav BBA approved, cavity spacer, rainscreen system used with a partial fill insulation cavity.
My opinion is that SureCav is the way forward and is a great product and great solution. I can see this completely doing away with outdated backing block design. I have been personally really impressed with the overall SureCav system and have happily shown some of your prospective customers around. I talked to your prospective customers about the many benefits of SureCav, including it being simple and easy to erect and also, with the advantage on a tight site it taking up less valuable storage space and can be moved and handled with ease. The biggest advantage, of course, is that you can increase the overall floor area by using SureCav.
Daniel Cox, Site Agent
Masonry construction, against the SureCav BBA approved, cavity spacer, rainscreen system used with a partial fill insulation cavity.
Love this product, my local building control officer recommended it for my stone built project. The product was easy to install and made the building of the stone walls quick and easy. I’m now using it on all projects. Nice to see a product that does what it says!
Glen Davison
Stone wall under construction with SureCav installed
If you haven’t used SureCav yet, look this product up – it’s the future!
JR Masonry
Masonry construction, against the SureCav BBA approved, cavity spacer, rainscreen system used with a partial fill insulation cavity.
I have specified Surecav on building regulations applications after the product had been recommended to me by the Local Authority Building Inspector and was interested to try it on my own extension. I found the product to be perfect for creating a random limestone facade which abuts the traditional rubble filled construction seamlessly yet overcomes the inherent problems of water ingress through the limestone fissures. Additionally, the reduction in depth of wall gives space for appropriate levels of insulation whilst achieving maximum internal space. I will continue to specify the product as the benefits far outweigh the costs and it is a breeze to install.
Jonathan Athay, JMA Design, North Yorkshire

Multiple Benefits
of Using SureCav

Using Surecav provides multiple benefits

With the June 2022 building regulations now in force, with SureCav25 and 75mm insulation, you will not need to amend your drawings to achieve 0.18Wm2K in an overall 100mm cavity.

Keep the wall width to a minimum and avoid having to purchase more expensive lintels. A new and lightweight alternative to heavy and expensive concrete backing blocks.

SureCav increases floor space and acts as a rainscreen to the harshest weather. BBA certified and readily available to specifiers, SureCav is the ultimate space and cost saving solution for cavity wall construction.

Read more

Surecav
Product Range

SureCav 50 cavity spacer rainscreen system
SureCav 50

The 50mm cavity spacer system. Creates a guaranteed clear, dry, moisture and mortar free BBA approved 50mm residual cavity
Panel size: 1200mm x 450mm x 50mm

£150.00 ex VAT

SureCav 25. The Keeping a clear, dry, vented cavity free from any moisture. Eliminating water ingress issues and damp in homes . Used with stone and Brick masonry finish with SureCav25 bba approved cavity spacer rainscreen system keeping clear, dry, vented moisture and mortar-free cavities guarenteed whilst protecting against wind-driven rain and avoiding water ingress issues easily
SureCav 25

The 25mm cavity spacer system. Creates a guaranteed clear, dry, moisture and mortar free BBA approved, 25mm residual cavity 
Panel size: 1200mm x 450mm x 25mm

£150.00 ex VAT

Surecav washers
Washers

Washers are used when installing SureCav on timber/SIP frame buildings to create a watertight seal. 5 per panel recommended
Size: 6mm diameter hole x 10mm deep

£11.00 ex VAT

Surecav type W vent
Type-W Vent

Achieves 1500mm2 per linear meter
BBA ventilation requirement, when installed every 0.5m high and low with these vents
Size: 105/115mm x 65 x 10mm

£24.00 ex VAT

Surecav type W vent-extender
Type-W Vent Extender Duct

The extension ducts are used with
the Type W vents. The Extenders are required with an outer leaf over 100mm deep.
Size: 200/225 x 65 x 10mm

£49.00 ex VAT

Certifications

View all certifications
bba logo

BBA Approved

BBA Certification is a trusted mark of quality in construction, awarded after rigorous testing by the British Board of Agrément. It ensures products meet all relevant standards and are fit for purpose.

LABC Approved

Local authority building control teams help people comply with the latest building regulations by giving feedback on plans and providing site inspections.

NBS Source

Used by architects, specifiers, and construction professionals, providing easy access to high-quality building product data. Offering detailed product information, technical specifications, and compliance documentation, all in one place

Talk to an expert about using SureCav for your next project

Call us now on 01963 34660 8am – 5pm (Mon-Fri), or fill in the contact form, to find out how SureCav benefits your build or ask us a question!

  • Join the SureCav Revolution
  • Become a SureCav Stockist
  • Fully Accredited by BBA
Contact Us Now
Find out how SureCav benefits your project, or ask us a question below..

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.